• Design:
  • Both clamping hubs are completely separable, due to split hubs and two radial screws ISO 4762 on each hub.
  • Any imbalance of the clamping hubs is compensated for by balancing bores located on the inside of the hub.
• Temperature range: -30° C to +100° C (-22° F to +212° F)
• Backlash: Absolutely backlash-free due to frictional clamp connection.
• Service life: These couplings are maintenance-free if the technical ratings are not exceeded.
• Tolerance: On the hub/shaft connection 0.01 to 0.05 mm
• Material:
  • Bellows made of highly flexible high-grade
stainless steel.
  • Hub material see table
• Brief overloads: Acceptable up to 1.5 times the value specified.
• Speeds: Up to 10,000 rpm, in excess of 10,000 available with a finely balanced version.
• Non-standard application: Custom designs with varied tolerances, keyways, non-standard material, bellows and ATEX designs are available upon request.
• Properties of Bellows Coupling model BKH:
  • easy to mount
  • suited for space restricted installations
  • low moment of inertia

Bản vẽ khớp nối BKH